cells_per_meter = 40.0
format = 8
name = 'Automatic air supply / logic bench'
next_id = 8
next_sensor_id = 3
primary_shaft = 6
scene = 2
solver = 'rusanov'

[logic]
next_id = 12

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 1
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'sensor'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Tank pressure'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 0.0, 0.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 1
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = true
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 150000.0
    id = 2
    initial = true
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'hysteresis'
    low = 120000.0
    maximum = 1.0
    minimum = 0.0
    name = 'Compressor demand'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 300.0, 0.0 ]
    pressure_reference = 'absolute'
    quantity = 'pressure'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = true
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 3
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'switch'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Master enable'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 300.0, 240.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 4
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'and'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Enabled demand'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 600.0, 0.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = 'Bench speed drive'
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 5
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'command'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Compressor motor enable'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 7
    position = [ 900.0, 0.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 6
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'slider'
    low = 0.25
    maximum = 300.0
    minimum = 0.0
    name = 'Compressor speed (rad/s)'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 600.0, 260.0 ]
    pressure_reference = 'none'
    quantity = 'angular_speed'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 94.247782230377197

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_speed'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 7
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'command'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Motor speed target'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 7
    position = [ 900.0, 260.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 8
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'readout'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Tank pressure readout'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 300.0, -180.0 ]
    pressure_reference = 'absolute'
    quantity = 'pressure'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 9
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'lamp'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Compressor running demand'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 900.0, -180.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 10
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'sensor'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Compressor crank pickup'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 0.0, 380.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 2
    sensor_kind = 'crank'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 11
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'readout'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Measured angular speed'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 300.0, 420.0 ]
    pressure_reference = 'none'
    quantity = 'angular_speed'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.wires]]
    from_node = 1
    from_port = 'value'
    to_node = 2
    to_port = 'in'

    [[logic.wires]]
    from_node = 2
    from_port = 'out'
    to_node = 4
    to_port = 'in1'

    [[logic.wires]]
    from_node = 3
    from_port = 'out'
    to_node = 4
    to_port = 'in2'

    [[logic.wires]]
    from_node = 4
    from_port = 'out'
    to_node = 5
    to_port = 'in'

    [[logic.wires]]
    from_node = 6
    from_port = 'out'
    to_node = 7
    to_port = 'in'

    [[logic.wires]]
    from_node = 1
    from_port = 'value'
    to_node = 8
    to_port = 'in'

    [[logic.wires]]
    from_node = 4
    from_port = 'out'
    to_node = 9
    to_port = 'in'

    [[logic.wires]]
    from_node = 10
    from_port = 'speed'
    to_node = 11
    to_port = 'in'

[[connections]]
a_part = 4
a_port = 'start'
b_part = 3
b_port = 'gas'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 4
a_port = 'end'
b_part = 2
b_port = 'inlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 5
a_port = 'start'
b_part = 2
b_port = 'outlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 5
a_port = 'end'
b_part = 1
b_port = 'face_x_negative'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 6
a_port = 'shaft'
b_part = 2
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[connections]]
a_part = 6
a_port = 'shaft'
b_part = 7
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 1
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'chamber'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Compressed air tank'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.40000000596046448, 0.2800000011920929, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 2
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'piston_pump'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Piston pump 2'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.0, 0.20000000298023224, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 3
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'reservoir'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Intake atmosphere'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.40000000596046448, 0.31999999284744263, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.039999999105930328, 0.039999999105930328 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 4
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 4'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.24137499928474426, 0.061380922794342041, 0.0 ], [ 0.14137500524520874, -0.021380960941314697, 0.0 ] ]
port_coordinates = []
position_m = [ -0.15862500667572021, 0.25861907005310059, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 5
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 5'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.1913750022649765, -0.041380941867828369, 0.0 ], [ 0.13137499988079071, 0.0013809502124786377, 0.0 ] ]
port_coordinates = []
position_m = [ 0.20862500369548798, 0.27861905097961426, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 6
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'shaft'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Main crankshaft'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.0, 0.049999997019767761, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.25, 0.035000000149011612, 0.035000000149011612 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.shaft]
    friction_nm = 0.15000000596046448
    inertia_kg_m2 = 0.0099999997764825821
    initial_angle_rad = 0.0
    initial_speed_rad_s = 0.0
    quadratic_nm_s2 = 0.0
    starter_nm = 0.0
    viscous_nm_s = 0.0020000000949949026

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 7
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'drive_motor'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Bench speed drive'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.2800000011920929, 0.049999997019767761, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.090000003576278687, 0.090000003576278687 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.drive]
    enabled = true
    speed_control = true
    target_speed_rad_s = 94.247779846191406
    torque_nm = 1.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[probes]]
generated_output = false
id = 1
name = 'Tank absolute pressure'
part = 1
position = 0.5
quantity = 0
reference_afr = 14.699999809265137

[[probes]]
generated_output = false
id = 2
name = 'Compressor shaft RPM'
part = 6
position = 0.5
quantity = 6
reference_afr = 14.699999809265137

[[probes]]
generated_output = false
id = 3
name = 'Drive power'
part = 7
position = 0.5
quantity = 8
reference_afr = 14.699999809265137

[[sensors]]
angle_offset_rad = 0.0
id = 1
kind = 'pressure'
name = 'Tank absolute pressure'

    [sensors.reference]
    label = ''
    part = 0
    position = 0.5

    [sensors.target]
    label = 'Compressed air tank'
    part = 1
    position = 0.5

[[sensors]]
angle_offset_rad = 0.0
id = 2
kind = 'crank'
name = 'Crank speed / position / Main crankshaft'

    [sensors.reference]
    label = ''
    part = 0
    position = 0.5

    [sensors.target]
    label = 'Main crankshaft'
    part = 6
    position = 0.5