cells_per_meter = 40.0
format = 9
name = 'Sensor Alpha-N EFI bench'
next_id = 15
next_sensor_id = 3
primary_shaft = 13
scene = 2
solver = 'rusanov'

[logic]
next_id = 4

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    ecu_strategy = 'ignition'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 1
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'sensor'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Crank pickup'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 0.0, 0.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 1
    sensor_kind = 'crank'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = 'Alpha-N ECU'
    boolean = false
    clamp = true
    command = 'motor_enable'
    ecu_strategy = 'alpha_n'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 2
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'ecu'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Engine ECU inputs'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 7
    position = [ 340.0, 0.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 0
    sensor_kind = 'pressure'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.nodes]]
    below = false
    binding_label = ''
    boolean = false
    clamp = true
    command = 'motor_enable'
    ecu_strategy = 'ignition'
    false_value = 0.0
    gain = 1.0
    high = 0.75
    id = 3
    initial = false
    input_count = 2
    input_high = 1.0
    input_low = 0.0
    kind = 'sensor'
    low = 0.25
    maximum = 1.0
    minimum = 0.0
    name = 'Actual throttle position'
    offset = 0.0
    output_high = 1.0
    output_low = 0.0
    output_pressure_reference = 'none'
    output_quantity = 'scalar'
    part = 0
    position = [ 0.0, 230.0 ]
    pressure_reference = 'none'
    quantity = 'scalar'
    sensor = 2
    sensor_kind = 'throttle_position'
    tolerance = 9.9999999999999995e-07
    true_value = 1.0
    value = 0.0

    [[logic.wires]]
    from_node = 1
    from_port = 'speed'
    to_node = 2
    to_port = 'speed'

    [[logic.wires]]
    from_node = 1
    from_port = 'angle'
    to_node = 2
    to_port = 'angle'

    [[logic.wires]]
    from_node = 3
    from_port = 'value'
    to_node = 2
    to_port = 'tps'

[[connections]]
a_part = 7
a_port = 'assignments'
b_part = 4
b_port = 'ecu_assignment'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'ecu_assignment'

[[connections]]
a_part = 8
a_port = 'start'
b_part = 1
b_port = 'gas'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 8
a_port = 'end'
b_part = 2
b_port = 'inlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 9
a_port = 'start'
b_part = 2
b_port = 'outlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 9
a_port = 'end'
b_part = 3
b_port = 'face_x_negative'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 10
a_port = 'start'
b_part = 3
b_port = 'face_x_positive'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 10
a_port = 'end'
b_part = 4
b_port = 'intake'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 11
a_port = 'start'
b_part = 4
b_port = 'exhaust'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 11
a_port = 'end'
b_part = 5
b_port = 'face_x_negative'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 12
a_port = 'start'
b_part = 5
b_port = 'face_x_positive'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 12
a_port = 'end'
b_part = 6
b_port = 'gas'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 13
a_port = 'shaft'
b_part = 4
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[connections]]
a_part = 13
a_port = 'shaft'
b_part = 14
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 1
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'reservoir'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pressure / atmosphere 1'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.64999997615814209, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.039999999105930328, 0.039999999105930328 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 2
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'throttle'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Throttle valve 2'
opening = 0.5
outlet_diameter_m = 0.039999999105930328
pedal_control = false
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.40000000596046448, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.05000000074505806, 0.05000000074505806 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 3
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'chamber'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Chamber / tank 3'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.20000000298023224, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.10000000149011612, 0.079999998211860657, 0.079999998211860657 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.injector]
    cylinders = 1
    ecu = 7
    ecu_label = 'Alpha-N ECU'
    finite_supply = true
    initial_kg = 0.10000000149011612
    maximum_kg_s = 0.0010000000474974513
    temperature_k = 300.0

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 4
ignition_tdc_deg = 0.0
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'cylinder'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Engine cylinder 4'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.0, 0.20000000298023224, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 5
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'chamber'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Chamber / tank 5'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.20000000298023224, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.079999998211860657, 0.079999998211860657, 0.079999998211860657 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 6
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'reservoir'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pressure / atmosphere 6'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.64999997615814209, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.039999999105930328, 0.039999999105930328 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 7
injection_enabled = false
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'ecu'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Alpha-N ECU'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.0, 0.5, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.10000000149011612, 0.02500000037252903, 0.075000002980232239 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.ecu]
    fixed_idle = false
    idle_base_opening = 0.079999998211860657
    idle_ki = 3.9999998989515007e-05
    idle_kp = 9.9999997473787516e-05
    idle_max_opening = 0.25
    idle_minimum_advance = -5.0
    idle_rpm = 1800.0
    idle_spark_gain = 0.0
    ignition_map = [ [ 0.0, 10.0 ], [ 15000.0, 40.0 ] ]
    overrun_cut_rpm = 3500.0
    overrun_fuel_cut_enabled = true
    overrun_ignition_cut_enabled = false
    overrun_resume_rpm = 2400.0
    power_afr = 12.800000190734863
    rev_limit_cut_time = 0.019999999552965164
    rev_limit_enabled = false
    rev_limit_fuel_cut_enabled = true
    rev_limit_ignition_cut_enabled = true
    rev_limit_rpm = 10000.0
    rev_resume_rpm = 9750.0
    stoichiometric_afr = 14.699999809265137
    throttle_closing_rate = 0.0
    throttle_closing_time_constant = 0.0
    throttle_rate = 1000.0
    throttle_time_constant = 0.0010000000474974513

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.sensor_ecu]
    enabled = true
    fuel_kg_cycle = [ 1.9999999949504854e-06, 3.9999998989515007e-05, 1.9999999949504854e-06, 3.9999998989515007e-05 ]
    fuel_rpm = [ 0.0, 6000.0 ]
    fuel_tps = [ 0.0, 1.0 ]
    strategy = 'alpha_n'

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 8
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 8'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.11500000953674316, 0.0, 0.0 ], [ 0.11499994993209839, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.53499996662139893, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 9
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 9'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.064999997615814209, 0.0, 0.0 ], [ 0.064999997615814209, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.31499999761581421, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 10
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 10'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.066375002264976501, 0.031380951404571533, 0.0 ], [ 0.066375002264976501, -0.031380951404571533, 0.0 ] ]
port_coordinates = []
position_m = [ -0.083625003695487976, 0.26861906051635742, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 11
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 11'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.071374997496604919, -0.031380951404571533, 0.0 ], [ 0.071374997496604919, 0.031380951404571533, 0.0 ] ]
port_coordinates = []
position_m = [ 0.088624998927116394, 0.26861906051635742, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 12
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 12'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.032000001519918442, 0.032000001519918442 ]
points_m = [ [ -0.20499998331069946, 0.0, 0.0 ], [ 0.20499998331069946, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.44499999284744263, 0.30000001192092896, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 13
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'shaft'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Main crankshaft'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.0, 0.049999997019767761, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.25, 0.035000000149011612, 0.035000000149011612 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.shaft]
    friction_nm = 0.15000000596046448
    inertia_kg_m2 = 0.15000000596046448
    initial_angle_rad = 0.0
    initial_speed_rad_s = 0.0
    quadratic_nm_s2 = 0.0
    starter_nm = 15.0
    viscous_nm_s = 0.0020000000949949026

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 14
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'drive_motor'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = '3000 RPM test drive'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.30000001192092896, 0.049999997019767761, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.090000003576278687, 0.090000003576278687 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.drive]
    enabled = true
    speed_control = true
    target_speed_rad_s = 314.15927124023438
    torque_nm = 1.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[probes]]
generated_output = false
id = 1
name = 'Cylinder pressure'
part = 4
position = 0.5
quantity = 0
reference_afr = 14.699999809265137

[[probes]]
generated_output = false
id = 2
name = 'Crank RPM'
part = 13
position = 0.5
quantity = 6
reference_afr = 14.699999809265137

[[probes]]
generated_output = false
id = 3
name = 'Charge AFR'
part = 4
position = 0.5
quantity = 5
reference_afr = 14.699999809265137

[[sensors]]
angle_offset_rad = 0.0
id = 1
kind = 'crank'
name = 'Crank speed / position / Main crankshaft'

    [sensors.reference]
    label = ''
    part = 0
    position = 0.5

    [sensors.target]
    label = 'Main crankshaft'
    part = 13
    position = 0.5

[[sensors]]
angle_offset_rad = 0.0
id = 2
kind = 'throttle_position'
name = 'Throttle position / Throttle valve 2'

    [sensors.reference]
    label = ''
    part = 0
    position = 0.5

    [sensors.target]
    label = 'Throttle valve 2'
    part = 2
    position = 0.5