cells_per_meter = 20.0
format = 8
name = 'Air Compressor'
next_id = 21
next_sensor_id = 2
primary_shaft = 6
scene = 0
solver = 'muscl'

[logic]
next_id = 1
nodes = []
wires = []

[[connections]]
a_part = 6
a_port = 'shaft'
b_part = 7
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[connections]]
a_part = 9
a_port = 'end'
b_part = 1
b_port = 'face_x_negative'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 9
a_port = 'start'
b_part = 8
b_port = 'outlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 10
a_port = 'end'
b_part = 8
b_port = 'inlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 10
a_port = 'start'
b_part = 15
b_port = 'gas'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 16
a_port = 'start'
b_part = 14
b_port = 'inlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 16
a_port = 'end'
b_part = 3
b_port = 'gas'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 20
a_port = 'start'
b_part = 18
b_port = 'inlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 20
a_port = 'end'
b_part = 14
b_port = 'outlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 19
a_port = 'end'
b_part = 18
b_port = 'outlet'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 19
a_port = 'start'
b_part = 1
b_port = 'face_x_positive'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'orifice'

[[connections]]
a_part = 6
a_port = 'shaft'
b_part = 18
b_port = 'shaft'
discharge = 1.0
inertance_length_m = 0.0099999997764825821
loss = 0.0
method = 'mechanical'

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 1
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'chamber'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Chamber / tank 1'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.21000000834465027, 0.25, 0.0099999997764825821 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.13000006973743439, 0.12500005960464478, 0.14000004529953003 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 3
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'reservoir'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pressure / atmosphere 3'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.21000000834465027, 0.25, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.039999999105930328, 0.039999999105930328 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 6
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'shaft'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Main crankshaft'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.019999999552965164, 0.05000000074505806, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.25, 0.035000000149011612, 0.035000000149011612 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.shaft]
    friction_nm = 1.0
    inertia_kg_m2 = 0.10000000149011612
    initial_angle_rad = 0.0
    initial_speed_rad_s = 94.247779846191406
    quadratic_nm_s2 = 0.0
    starter_nm = 15.0
    viscous_nm_s = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 7
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'drive_motor'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Bench speed drive'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.2800000011920929, 0.049999997019767761, 0.0 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.090000003576278687, 0.090000003576278687 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.drive]
    enabled = true
    speed_control = true
    target_speed_rad_s = 125.66371154785156
    torque_nm = 1.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 8
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'throttle'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Throttle valve 8'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.3399999737739563, 0.24999998509883881, 0.010000020265579224 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.05000000074505806, 0.05000000074505806 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 9
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 9'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.019999999552965164, 0.019999999552965164 ]
points_m = [ [ -0.0099999606609344482, -1.4901161193847656e-08, -1.4399999380111694 ], [ 0.034999966621398926, 0.0, -1.4399999380111694 ] ]
port_coordinates = []
position_m = [ -0.31000000238418579, 0.25, 1.4499999284744263 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 10
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 10'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.019999999552965164, 0.019999999552965164 ]
points_m = [ [ 0.31999999284744263, -1.4901161193847656e-08, -0.070000000298023224 ], [ 0.38000002503395081, -1.4901161193847656e-08, -0.069999977946281433 ] ]
port_coordinates = []
position_m = [ -0.74000000953674316, 0.25, 0.079999998211860657 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 14
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'check_valve'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Check valve 14'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ 0.060000017285346985, 0.25, 0.010000016540288925 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 180.0, 5.0089556680177338e-06, 180.0 ]
size_m = [ 0.019999999552965164, 0.040000002831220627, 0.040000002831220627 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 15
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'reservoir'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pressure / atmosphere 15'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.42000001668930054, 0.24999998509883881, 0.0099999960511922836 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.039999999105930328, 0.039999999105930328, 0.039999999105930328 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 16
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 16'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.019999999552965164, 0.019999999552965164 ]
points_m = [ [ -0.52999997138977051, 0.0, -0.099999979138374329 ], [ -0.38999995589256287, 0.0, -0.10999999940395355 ] ]
port_coordinates = []
position_m = [ 0.59999996423721313, 0.25, 0.10999999940395355 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 10.0
cracking_pressure_pa = 100.0
diameter_m = 0.039999999105930328
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 18
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'piston_pump'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Piston pump 18'
opening = 1.0
outlet_diameter_m = 0.039999999105930328
pedal_control = true
phase_deg = 0.0
points_m = [ [ -0.15000000596046448, 0.0, 0.0 ], [ 0.15000000596046448, 0.0, 0.0 ] ]
port_coordinates = []
position_m = [ -0.029999997466802597, 0.1900000125169754, 0.0099999997764825821 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 180.0, 5.0089556680177338e-06, 180.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.10000000149011612
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 19
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 19'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.019999999552965164, 0.019999999552965164 ]
points_m = [ [ 0.11500000953674316, 0.0, 0.54999995231628418 ], [ 0.21274998784065247, -0.0044444352388381958, 0.54999995231628418 ] ]
port_coordinates = []
position_m = [ -0.25999999046325684, 0.25, -0.53999996185302734 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[parts]]
afr = 14.699999809265137
ambient_temperature = 300.0
bore_m = 0.075000002980232239
burn_duration_deg = 60.0
burn_start_deg = 5.0
compression = 11.5
cracking_pressure_pa = 100.0
discharge = 0.80000001192092896
energy_variation = 0.05000000074505806
exhaust_close_deg = 370.0
exhaust_open_deg = 130.0
exhaust_profile = []
exhaust_valve_count = 1
exhaust_valve_m = 0.028000000864267349
fuel_lhv = 44000000.0
heat_transfer = 100.0
id = 20
injection_enabled = true
intake_close_deg = 580.0
intake_open_deg = 350.0
intake_profile = []
intake_valve_count = 1
intake_valve_m = 0.029999999329447746
junction_method = 0
kind = 'pipe'
maximum_lift_m = 0.0080000003799796104
misfire_probability = 0.0
name = 'Pipe / reducer 20'
opening = 1.0
pedal_control = true
phase_deg = 0.0
point_diameters_m = [ 0.019999999552965164, 0.019999999552965164 ]
points_m = [ [ -0.31274998188018799, -0.0044444352388381958, 0.6799999475479126 ], [ -0.24999997019767761, 0.0, 0.6799999475479126 ] ]
port_coordinates = []
position_m = [ 0.29999998211860657, 0.25, -0.66999995708465576 ]
pressure_pa = 101325.0
rod_m = 0.1120000034570694
rotation_deg = [ 0.0, 0.0, 0.0 ]
size_m = [ 0.11999999731779099, 0.11999999731779099, 0.11999999731779099 ]
spark_advance_deg = 20.0
stroke_m = 0.068000003695487976
temperature_k = 300.0
turning_loss = 0.0
valve_damping = 24.0
valve_mass_kg = 0.035000000149011612
valve_preload_n = 100.0
valve_spring_n_m = 30000.0
wall_area_m2 = 0.019999999552965164
wiebe_a = 5.0
wiebe_m = 2.0

    [parts.exhaust_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

    [parts.intake_dynamics]
    cam_restitution = 0.0099999997764825821
    damping = 24.0
    mass_kg = 0.035000000149011612
    maximum_lift = 0.014999999664723873
    seat_force = 100.0
    seat_restitution = 0.004999999888241291
    spring_rate = 30000.0
    stop_restitution = 0.0099999997764825821

[[probes]]
generated_output = false
id = 1
name = 'Pressure / Chamber / tank 1'
part = 1
position = 0.5
quantity = 0
reference_afr = 14.699999809265137

[[sensors]]
angle_offset_rad = 0.0
id = 1
kind = 'pressure'
name = 'Pressure / MAP / Chamber / tank 1'

    [sensors.reference]
    label = ''
    part = 0
    position = 0.5

    [sensors.target]
    label = 'Chamber / tank 1'
    part = 1
    position = 0.5